Company News

In terms of wall thickness variation, the situations for stainless steel tube and stainless steel seamless tube are fundamentally different, consequently demanding distinct requirements for their control systems. Typically, welded steel tubes exhibit minimal continuous longitudinal wall thickness variation.

304 Stainless Steel Sheet is widely used and has become a popular material in the market due to its excellent performance. Today, the editor will analyze the problems that are prone to occur when cutting 304 Stainless Steel Sheet.

The requirements for decarburization treatment of 304 stainless steel sheets involve decarburizing (and deoxidizing) molten steel under vacuum, which is based on the influence of pressure on chemical reactions. A decrease in the partial pressure of carbon monoxide promotes the decarburization process.

Stainless steel tubes are manufactured by coiling steel plates or strips using machinery and molds, followed by welding. The key to ensuring the quality of stainless steel tubes lies in the quality of the raw materials.

The stainless-steel-tube is characterized by ultra-low carbon, low nitrogen, a typical composition of Cr 17%, Ni 5%, and a higher nitrogen content compared to first-generation duplex steel stainless-steel-tubes. This enhances resistance to stress corrosion cracking and pitting corrosion in acidic media with high chloride ion concentrations.

The surface roughness of a stainless-steel-tube has varying impacts on component coatings, heat transfer, circuit resistance, the reflection of surface operational capabilities and radiation source characteristics, fluid and vapor flow resistance, and the distribution of current on the conductor surface, among other factors.